From 63626f2f6fc7e8912a349f120e37998cd1a05554 Mon Sep 17 00:00:00 2001 From: jjsuperpower Date: Mon, 5 Sep 2022 20:04:52 -0500 Subject: moveing file around --- doc/ASAP32-ISA.md | 195 ------------------------------------------------------ 1 file changed, 195 deletions(-) delete mode 100644 doc/ASAP32-ISA.md (limited to 'doc') diff --git a/doc/ASAP32-ISA.md b/doc/ASAP32-ISA.md deleted file mode 100644 index 3c3c016..0000000 --- a/doc/ASAP32-ISA.md +++ /dev/null @@ -1,195 +0,0 @@ -# Vertex KISS 32 - Machine Code Spec -^ So Vertex is already a name for an FPGA, should we change this? -I propose a different name: - - ASAP Soc 32 a KISS architecture - - As - Simple - As - Possible - -## General Instruction Format - X = HEX - B = BIN - - MAX INSTRUCTIIONS = 256 - ALL INSTRUCTIONS ARE ATOMIC - -### C-Type, Control - XX X X XXXX - Opcode d RS1 IMM - -### I-Type, Immediate - XX X X XXXX - Opcode RD RS1 IMM - -### R-Type, Arithmetic - XX X X X XXX - Opcode RD RS1 RS2 ddd - -### JR-Type, Compare and Jump - XX X X X XXX - Opcode Jump Condition RS1 RS2 ddd - -### JI-Type, Compare and Jump - XX X X XXXX - Opcode Jump Condition RS1 IMM - -## Registers - Maximum registers = 16 - Register width = 32 - All are R/W except 0X - - 0X Always Zero - AX GP-0 - BX GP-1 - CX GP-2 - DX GP-3 - EX GP-4 - FX GP-5 - GX GP-6 - HX GP-7 - IP Instruction Pointer - SP Stack Pointer - FLG Processor Flags - CS0 Control status 0 (saves IP) - CS1 Control status 1 (saves SP) - CS2 Control status 2 (saves FLG) - PDA Page Directory Address - -### FLG Flag Register Bitfield - The lower half is read/write - The upper half can be read or written to in supervisor mode only - - FLG[0] Carry - FLG[1] Overflow - FLG[2] Zero - FLG[3] Sign - FLG[4] Odd (parity) - FLG[5-15] RESERVED - FLG[16] Interrupt enable* - FLG[17] User mode* - FLG[18] Paging enabled* - FLG[19-31] RESERVED* - - *Must be in supervisor mode (FLG[17]=0) to set - -## Integer Instructions - -### R-Type - ADD RD, RS1, RS2 RD = RS1 + RS2 - SUB RD, RS1, RS2 RD = RS1 - RS2 - XOR RD, RS1, RS2 RD = RS1 ^ RS2 - OR RD, RS1, RS2 RD = RS1 | RS2 - AND RD, RS1, RS2 RD = RS1 & RS2 - LSL RD, RS1, RS2 RD = RS1 << RS2 (logical) - LSR RD, RS1, RS2 RD = RS1 >> RS2 (logical) - ASR RD, RS1, RS2 RD = RS1 >> RS2 - MUL RD, RS1, RS2 RD = RS1 * RS2 - MULU RD, RS1, RS2 RD = RS1 * RS2 (unsigned) - DIV RD, RS1, RS2 RD = RS1 / RS2 - DIVU RD, RS1, RS2 RD = RS1 / RS2 (unsigned) - - *DIV is based on shift-and-multiply algorithm - *DIV Ex: 8000/192 - (8000/64)/3 - (8000>>6)/3 - (8000>>6)*0x5555>>16=41 - -### I-Type - ADDI RD, RS, IMM RD = RS + IMM - SUBI RD, RS, IMM RD = RS - IMM - XORI RD, RS, IMM RD = RS ^ IMM - ORI RD, RS, IMM RD = RS | IMM - ANDI RD, RS, IMM RD = RS & IMM - LSLI RD, RS, IMM RD = RS << IMM (logical) - LSRI RD, RS, IMM RD = RS >> IMM (logical) - ASRI RD, RS, IMM RD = RS >> IMM - DIVI RD, RS, IMM RD = RS / IMM - DIVIU RD, RS, IMM RD = RS / IMM (unsigned) - -### JR Instructions - JMP 0 if (True) - JMP 1 if (RS1 != RS2) - JMP 2 if (RS1 == RS2) - JMP 3 if (RS1 > RS2) Unsigned - JMP 4 if (RS1 >= RS2) Unsigned - - JMP C if (RS1 > RS2) Signed - JMP D if (RS1 >= RS2) Signed - -### JI Instructions - Compare and then jump (IP = JMP) - - JMPI 0 if (True) - JMPI 1 if (RS1 != IMM) - JMPI 2 if (RS1 == IMM) - JMPI 3 if (RS1 > IMM) Unsigned - JMPI 4 if (RS1 >= IMM) Unsigned - - JMPI C if (RS1 > IMM) Signed - JMPI D if (RS1 >= IMM) Signed - -### Jump Aliases - JEQ - JLT - JGT - JLE - JGE - JLTU - JGTU - JLEU - JGEU - - -### Control Instructions - NOP Do nothing -> opcode = ZERO - HLT Spinlock the CPU* - PUSHR RS SP+=1 ;*SP = RS - POPR RS RS = *SP ;SP-=1 - PUSHI IMM SP+=1 ;*SP = IMM - INVP IMM Invalidate entry in TLB* - JMP IMM Jump to address IMM - CALL LABEL CS0=IP; IP=LABEL - INT IMM CS0=IP; CS1=SP; CS2=FLG; IP=IDT[IMM]* - SCALL Same as call but is used to make calls to the kernel (fixed IDT address) - IRET IP=CS0; SP=CS1; FLG=CS2* - RET IP = CS0 - SIF Set interrupt flag* - CIF Clear interrupt flag* - - *Requires processor to be in supervisor mode (FLG[17]=0) - -## Interrupt Descriptor Table -This will be in a fixed memory location, this will contain pointers to the interupt -function. - - IDT[0] Divide-by-zero exception - IDT[1] Hardware error (NMI) - IDT[2] Overflow - IDT[3] Invalid Opcode - IDT[4] General-protection fault - IDT[5] Page fault - IDT[6] Software interrupt (reserved for OS) - IDT[7-31] RESERVED - IDT[32-255] Platform interrupts (PIC, hard drive, keyboard, etc.) - -## Page Directory - -The page directory contains 1024 page tables that have 1024 entries that are -4096 bytes wide. Optionally, the page table can be 4MB bytes wide with a setting -in the page table. If this bit is set, there is 1024 entries in the page -directory; otherwise, there are 2^20 entries. - -### Page table layout - - PT[0] Present - PT[1] R/W - PT[2] User-mode - PT[3] Accessed - PT[4] Dirty - PT[5] PWT - PT[6] Cache-disable - PT[7] Page size (0=4KB 1=4MB) - PT[8-31] Physical address of page -- cgit v1.2.3