Age | Commit message (Collapse) | Author |
|
Remove an inline assembly instruction that was placed for debugging
purposes.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add new source files to the x86 architecture build configuration.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add references to the PMM bitmap to the linker script.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add a linked-list implementation using the kmalloc system.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add a simple implementation of kmalloc. This system only works on
x86-based processors at the time of commit.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add a proper page control API. These functions allow the kernel to
directly map and unmap pages in the logical address space.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add a simple, bitmap-based physical memory management system.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add support for the multiboot specification. These files will allow the
kernel to read the multiboot header information as well as the provided
memory map.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Make the function serial_writestring static. This is an optimization
specifically for small functions such as this one.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Remove an unused local variable from tty_putchar. Instead, just cast the
signed char to unsigned as needed.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Replace individual function calls with a single switch-case structure
for system calls. The new function, handle_syscall, will construct and
call the interrupt without input from the programmer.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Finish implementing pic_eoi and similar. This allows standardized
communication with the x86 PIC chip.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Define a few standard Unix system calls. These may change based on
future needs.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Make the register_irq_function accessible from files including pic.h.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Make all variables with char or char* type into uint8_t. This makes the
system more consistent and issues fewer compiler warnings.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Remove references to extern functions. All the necessary functionality
for this file is already contained.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Create the ISR stubs for use by IRQ handlers.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Actually install the ISR handlers to the IDT.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Remove the irq number from the irq handler. This information is already
stored in the ISR frame structure.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Call the page fault handler when a page fault occurs instead of just
dumping the registers and halting.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add a infinite while loop just in case the "hlt" instruction fails.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Remove several preprocessor macros that serve no purpose and pollute the
source file.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Perform some initialization routines on the TSS structure before loading
its address.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Define the load_page_dir and enable_paging functions in assembly. This
allows normal C code to initialize the CR3 register and control paging
without using inline assembler.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Move the initial C entry-point to its own file. Call all the i386
specific initialization routines from the new i386_entry function.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Fix several small bugs in assembler.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
The serial_writestring function is small enough and platform-agnostic,
and therefore it should be moved into the main serial header and marked
as inline.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
The x86 system call/interrupt handlers should be refactored to be more
readable.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
The CC variable is already defined by the make program, so use "CC:="
instead of "CC?=". This makes sure the proper cross compiler is in use.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Move all files not needed for the bootstrap process out of boot and into
the main x86 source directory.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Make the inline assembly calls consistent across different i386 files.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add support for rudementary system calls and IRQ interrupts.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Simplify the setup and definitions of GDT/TSS entries.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add targets to perform a test run and debug run inside a VM.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Simplify the interrupt descriptor table setup and frame assembly.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Add support for the tab character in the virtual terminal.
Signed-off-by: Danny Holman <dholman@gymli.org>
|
|
Rename the array/pointer to the GDT array in gdt.c pointer to be a bit
clearer.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Include information about the current stack frame in the IDT handler(s).
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Add functions that let the OS read the internal state registers of the
8259 PIC.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Fix the i386's general exception handler to actually work. Fix provided
by Jon Sanderson (jjs295356@gmail.com).
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Fix a bug in which the size of the main GDT array and the actual number
of descriptors are different values.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Add support for the 8259 programmable interrupt controller.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Create files that add IDT support for i386.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Remove the '*.s' line from .gitignore. There are important assembler
files that should be in a distribution.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Add the Developer's Certificate of Origin to the documentation
directory. This allows developers to keep their own copyright.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Add two ring-3 segment discriptors to the GDT during gdt_install.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Add parenthesis around the GDT setup macros. This is done to prevent
having to do it when using them.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Add a set of routines that setup the x86's global descriptor table.
Signed-off-by: Danny Holman <dholman@gymli.xyz>
|
|
Move the start of the kernel image to the "higher half" of memory. This
also enables paging.
|
|
Add a 'k' prefix to the kernel versions of the printf family.
|